Best canning seamers for 2020

The owners of summer cottages always stock up on various pickles, drinks and sweet preserves. To do this, they put vegetables and berries with fruits in various jars, but so that the products do not deteriorate after a few months, they must be properly preserved. For this purpose, seaming machines are produced.

Most people use caps without special threads, so a seaming machine is indispensable. Manufacturers offer dozens of models that cope with this task, but not all of them are highly reliable, and some even break down after the first batch. To prevent this from happening, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best canning seamers for 2020.

Features of the device

Any seaming machine is designed for only one thing - hermetically sealed lids. The quality and shelf life of homemade products depends on this. Basically, glass containers with a neck of 1-82 RMS are used.

Each model differs in technical characteristics and convenience. Stores sell:

• manual screw machines;
• snail type devices;
• automatic models;
• electrical;
• semi-automatic seaming machines.

Screw devices are considered an old model. Even today, they are used in many families, as they are of high quality performance and a long service life. The latter is achieved through a simple mechanism. This version consists of a frame and a handle with manually adjustable rollers. This element is responsible for the tightness of the seal. The principle of operation is also simple: it is enough for a person to install the frame and make a few turns, while it is necessary to tightly press the rim of the lid to the neck. This will allow for maximum sealing. To remove the framework, the user has to make several rotations in the opposite direction. The key must not be removed during these operations.

Another popular device is considered to be a snail type model. The design is practically the same as in the previous version. The only difference between this element is the presence of spiral grooves. Thanks to this, it is easier for a person to determine the number of turns before complete sealing. The outer part of this device is equipped with 2 screws, there is another one that is installed at the bottom. The main purpose of the last element is rotation control. Manufacturers produce devices that are characterized by good smoothness, which helps to close dozens of bottles without much discomfort. The design of such models is provided with a spring bearing.

Semi-automatic models differ from screw models in that a person does not need to constantly adjust the degree of pressure. This operation is performed automatically when the handle is turned.Thanks to this equipment, it is easier for a person to close several batches, while saving time.

Automatic variants are distinguished by the presence of 2 levers. During their lowering (this process must be carried out simultaneously), a spring is set in motion. This element fits snugly and securely around the bezel. To prevent the user from crushing the lid during sealing, a limiting stopper is provided in the design.

Electrical equipment is rarely used in households, as it is expensive and often not so profitable to buy. One way or another, such performances are suitable as a gift. Electric seaming machines are easy to work with, yet they tightly seal the container.

How to use correctly

When a person buys a new typewriter, there are some steps to be taken before using it. The first thing to do is clean the factory grease. To remove it, you do not need to use special substances; a regular detergent will do.

When using the manual model, it is necessary to install the frame on the cover and press it down with a little effort with the other hand. Taking the handle, you should make the required number of turns. With each full rotation, the handle is twisted so that the rollers grip the lid more tightly. The tightness of the container depends on this. In total, you should perform about 10 turns, then remove the frame with reverse movements.

When performing operations using a "snail" or semi-automatic machine, it is not necessary to count the number of rotations. This process can be trusted to the mechanism. In addition, the person does not need to exert effort while working.

If an automatic model is used, the handles are set to neutral. After that, the frame is placed on the lid, and the handles are pushed apart. For greater reliability, some users perform this operation again, only before that they turn the can by 90 degrees.

Advantages and disadvantages of various types

After the user has familiarized himself with the various models, it is important to know their features and disadvantages during operation. With this information, it will be much easier to buy a quality option in any store.

Handicrafts

A distinctive feature of such devices is their low price. However, it will take more time to twist the cans, so this option is suitable for those who do not stock up on a large amount of jam, compotes and pickles.

It is also important to remember about the quality of the product, because too cheap designs break down quickly. It is better to buy models that are stiff. The preferred material of manufacture is food steel. The kit must contain factory documents and a warranty card, so that in case of a breakdown, the machine can be easily returned.

Some stores allow you to try the product before purchasing. If there is such an opportunity, then it is better to do it. So a person will check the quality of the mechanism and the convenience of the machine. Visual inspection will also reveal cracks and chips, especially on the plastic part.

Snail

One of the best options, which has a simple design and high reliability. Thanks to this model, it will become easier for a person to work with large batches.

The principle of operation of the snail-type seamer is simple: the user needs to place the frame on the surface, then turn the handle 5 times. There is nothing complicated in this process, so the design will suit even inexperienced housewives.

Another feature of the product - if the seaming is configured correctly, the user will not be able to twist the container or break it due to strong pressure. In addition, thanks to the self-adjustment of the handle, it does not need to be constantly changed. The cost of this option is slightly more expensive than screw.

But we must not forget about the visual inspection. You should familiarize yourself with the device from all sides and identify malfunctions, if any.The main disadvantages of these models include:

• Factory flaw. Often there are products with factory defects on store shelves. For example, a common problem is roller misalignment after the first spin. The cause of the occurrence is the wrong slot of the spirals. When using a design with defects, it will not be possible to achieve good tightness, therefore, if possible, it is better to check the product.
• The need for an initial fit. This disadvantage does not apply to all models, but only to budget ones. To carry out this operation, it is necessary to install the machine on the lid, and then bring the handle to the beginning of the spiral. Despite the fact that this work is not so difficult, it can cause discomfort for beginners.
• To remove the device from the can, you need to unwind it. There is no other way to remove the machine.
• The snail is not suitable for use with poor quality lids. It is best to use it only with those elements that are durable and even.

Semi-automatic

The main advantages of these models are simplicity and reliability. No fine-tuning is required because the pressure element is set correctly. This makes it possible to twist dozens of cans in a minimum time.

All the user needs to do is to circle the handle several times, slightly pressing it, and then perform these actions in the opposite direction to remove the structure from the lid.

To prevent the device from crushing the lid and breaking the neck, the movement of the rollers is limited. This does not affect the quality of tightness.

Another feature of these models is their low weight and high strength. After canning, the seam is neat and even.

Automatic

This is one of the best modern options that allows you to free up time. It will take the user only 10 seconds to twist one can. This is an excellent indicator, given that when using standard devices, a person spends 1 to 3 minutes to seal one can.

These devices also have some disadvantages:

• it is necessary to evenly place the body of the product on top of the can;
• to lower the handles down, you must apply sufficient force;
• you need to spend more money to buy a quality device.

Rating of the best metal seamers

Hostess for home canning

It is a semi-automatic machine with low price and high durability. Thanks to this design, a person will be able to close 2 times more cans, compared to standard devices, in the same period of time. The recommended outside diameter of the neck is 82 mm. The product is manufactured and manufactured only in Russia. The metal part is made securely.

The average cost is 240 rubles.

Advantages:

Disadvantages:

MZA "Click"

This is a handy product for home canning. This reliable mechanism allows dozens of such operations to be performed. It is suitable for use in conjunction with caps with hardness marks EZhK-18, 20 and 22. The product guarantees automatic seaming. This became possible thanks to a special mechanism, which consists of a steel eccentric.

The average cost is 700 rubles.

Advantages:

Disadvantages:

Poltava with two rollers МЗП 16.001

It is a semi-automatic machine made of durable but lightweight metal. It is suitable for both experienced users and beginners who have never rolled a can. Vegetables, fruits and berries - with this machine, a person can roll up any can.

The ergonomic design allows you to work comfortably and forget about calluses and physical activity.Even with frequent use, there is no chance of jamming the mechanism, which has a positive effect on the service life.

The average cost is 290 rubles.

Advantages:

Disadvantages:

MASHENKA MZ.1.KP AUTOMATIC BOROVICHI

This is an automatic machine that will simplify the canning procedure. The service life is 10,000 cans, which is a high indicator for a home device. It provides a tight and airtight seal, which has a positive effect on storage. To close the lid, you need to apply a force equal to 2.8 kg. This may seem a little daunting to beginners at first, but over time, the process will become easy.

Average cost: 1 600 rubles.

Advantages:

Disadvantages:

Kredmash MZP 1

This is a reliable and durable semi-automatic machine for quickly closing cans at home. No pressure is required on the handles, making it easy to achieve a tight seal. In addition, a special mechanism protects the container from chips and cracks.

Average price: 990 rubles.

Advantages:

Disadvantages:

Rating of the best products with a plastic part

"Victoria" semi-automatic

This is a quality Russian-made product that will suit every user. The machine is made of durable materials that guarantee safe operation and good sealing. The product features a comfortable grip and high reliability.

Average price: 1 100 rubles.

Advantages:

Disadvantages:

"Meschera-2", screw

It is an efficient capping device for glass containers with a mouth of 82 mm. The product is distinguished by a high-quality body and comfortable handles that allow operations to be carried out without any problems. The rollers are made with high quality and will not damage the bank.

The average cost is 700 rubles.

Advantages:

Disadvantages:

Delta М0000000480 "Les"

This is a budget model for high-quality sealing of standard cans. The robust housing guarantees a long service life, and the semi-automatic roller allows the operation to be carried out in 8 turns. The clamping force is manually adjustable, which allows the use of covers from different manufacturers.

Average price: 370 rubles.

Advantages:

Disadvantages:

Motor-Sich MZN-1S

This is a high-quality device that provides complete tightness in several turns. The handle is made of high-quality plastic, which sits nicely in the hand and does not rub the palm. The closure process takes a minimum of time, which allows many cans to be closed. The body is made of food grade steel.

The average cost is 900 rubles.

Advantages:

Disadvantages:

Muscovite semiautomatic device Pilot

This is a cheap snail-type model for quick cans sealing.It is made from durable materials that provide high reliability and durability. The small weight of the machine guarantees convenience during work. Each lid closes efficiently and reliably.

Average price: 215 rubles.

Advantages:

Disadvantages:

Conclusion

To choose a quality seaming machine, you must take into account the material of manufacture and the popularity of the manufacturer. This will help you find the best option in a short period of time. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.