🚰 Best bilge pumps and pumps for 2020

0

Those who constantly go on a boat or yacht know that water is an unpredictable element. At one hour it can be calm, and at another it will create the risk of sinking ships. Any experienced boatman should take care not only of his own safety, but also of passengers. High waves, holes, downpour all fill the ship with water. You can use a scoop or bucket to get rid of it, but it will take a lot of time and effort. Better to use special equipment - bilge pumps. After installing this device, the place with high liquid level will dry out after 5-10 minutes.

The editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best bilge pumps and pumps for 2020.

Why use bilge pumps

To better understand where and how the equipment is used, it is important to know its features. It doesn't matter what a person uses an inflatable or rigid boat, with this device any amount of liquid will be removed in a few minutes.

Most often this device is used on motor boats with an open cockpit. The reason is simple: since the ship is moving quickly on the sea or lake, it takes all the hard shocks of the waves, because of this, the spray gets on board. And if all this is accompanied by bad weather with rainstorms, the situation is aggravated, and water can overflow and interfere with normal management.

But this is not the only reason for using bilge pumps. They may also be needed in cases where the case does not have sufficient tightness. Fluid can constantly seep in and cause discomfort.

Even a light pouring rain can bring a boat with an open cockpit to sink in a few minutes, if the vessel is not drained in time. Having bought this device once, a person will get rid of unpleasant situations in the future.

It is important to understand that scoops and buckets were effective in the past and should not be used today. It takes a lot of time and effort for a person to eliminate even a small amount of water. The longer the drying process takes, the worse the consequences will be. After all, an emergency situation creates dangerous conditions not only for passengers, but also for some elements of the vessel. In this case, the boat's speed will drop 1.5-2 times, and this can increase fuel consumption. Also, due to large flooding, a person will not be able to turn normally, since the center of gravity will sharply shift.

Therefore, pumping out with a ladle and a bucket is not always the right decision. After all, the pump will cope with the problem faster, especially since today models are produced that are able to automatically turn on in an emergency and instantly eliminate the problem. The boatman will not even have to be distracted by the flooding, but simply make sure that it does not worsen. The use of bilge pumps is simple, and even a beginner who has never used this device can handle the installation.

Varieties of pumps for ships

Despite the fact that the main purpose of this device is only one - pumping water overboard, it is important to know the types of this device, this will help you choose the best option. The product can operate both from mechanical stress and turn on independently.For this, the latest model uses a special electrical system. To understand which of these options to buy, it is important to know the advantages and disadvantages of each type.

Electric bilge pumps

This is the more popular option as it requires no action from the boatman. The electric motor will do all the work on its own. The device is a small cap, inside this element is a motor equipped with a plastic impeller.

The equipment works as follows: as soon as electricity is supplied, the blades begin to rotate, which contributes to the injection of air. From this, water begins to move through the connected pipes and overflow overboard. It is important to see that there is a filter below that will protect the impeller from candy wrappers, dirt, algae, etc. Without this element, it is not worth operating the product, as it will quickly break down.

Manufacturers produce pumps that require a voltage of 12 V. Therefore, the product is suitable for all boats and boats. If you plan to use the equipment on a yacht, then it is better to give preference to models where the voltage is 24 V. In addition, electric pumps differ in performance and power. One device is capable of pumping out 50 liters of water in a minute, and the second up to 200 liters.

To make it easier to deal with the purchase of an electric model, it is important to know only 4 classifications of devices:

  • Products with a capacity of up to 30 liters per minute are auxiliary. They are most often used to remove small amounts of liquid.
  • For small boats, pumps up to 50 liters per minute are suitable. They will eliminate leaks in a short period of time and allow you to move on without any problems.
  • In yachts and boats of medium size it is customary to use bilge pumps with a capacity of 100 l / min. Thanks to them, local flooding can be eliminated in 10-15 minutes.
  • On large yachts or small ships, a pump installation of 180 l / min is required. In this case, the electric motor must be replaceable. The consumption of such equipment is large and amounts to 250 watts. Therefore, it is not suitable for small vessels.

Some models are equipped with sensors that automatically react in cases of severe flooding. This element works on the principle of a flush tank, since a moisture level meter and a float are installed inside.

This solution also has disadvantages. So the equipment will not be able to drain the vessel 100%. After performing all the operations, a person will notice that a small amount of water remains, about 1-2 cm. This amount will have to be withdrawn manually or put the device at the deepest point. We must not forget that electrical devices have difficulty raising water. Therefore, it is not worth raising the hose to a height of 5-6 meters, since the water will not be able to quickly leave its limits. This is forgotten by many beginners, which is why flooding is not eliminated.

Mechanical pumps

If a person uses an inflatable or wooden boat that is not equipped with an electric motor, then mechanical pumps can be used for pumping. There are two popular versions in the store - diaphragm and piston. The first model functions as follows:

  • After lifting the lever, the diaphragm begins to stretch;
  • Liquid enters the pump;
  • The release is accompanied by the compression of the camera;
  • Further, water begins to flow into the pipe;
  • Removal overboard.

This option differs in that it is able to achieve a productivity of 50 l / min, which is a good result. It takes a small amount of effort though.

Piston-type models are not capable of satisfying the user with high power, as the previous version. The external design looks more like a standard syringe pump, the only difference is that there is a long branch pipe. The principle of operation of this option is also not difficult, due to physical impact, the piston begins to move, the liquid enters the hose, and then pours out.

Despite the simple description, the process will take a little time and effort.Therefore, the product is only suitable for pumping out a small amount of moisture. The advantages of this option are complete autonomy, since the device does not need to be installed on the hull of the boat, which makes it possible to use it in inflatable boats.

Another type of piston-type pumps is a leg piece. A similar model works on the principle of a frog pump. To drain the vessel, it is necessary to use a pedal that is clamped by the foot. The peculiarity of this product is that the water is pumped out completely, no 1-2 cm remains. A piston pump can be used in conjunction with an electric pump to quickly eliminate residues.

The most inexpensive bilge pumps

TSUNAMI T500

An excellent device suitable for small boats, the capacity of the device is 33 liters per minute. Pump type - circulating. Made of durable plastic that does not fade in the sun.

There is a convenient lever. The hose connection is made of high quality. The operating voltage is 12 V. Small dimensions allow installing the product in any place.

The average cost is 1,500 rubles.

TSUNAMI T500

Advantages:

  • Good and fast drying;
  • Effective work;
  • Durability;
  • Durable body;
  • There is a convenient lever;
  • External execution.

Disadvantages:

  • Not found.

EUROPUMP II 550GPH

Reliable instrument that is RINA certified according to CE 94/25. The maximum capacity reaches 32 l / min, which is a good result for this type of equipment.

It is connected to an electric motor with a voltage of 12 V. The maximum lifting height is 4.5 meters. The device has a small size, which allows you to install it at the lowest point and forget it before the flood.

Sold at a price of 1 800 rubles.

EUROPUMP II 550GPH

Advantages:

  • Efficiency;
  • The outer part is made of durable plastic;
  • Convenient hose connection;
  • Lifting height - 4.5 meters;
  • Long service life;
  • Doesn't make much noise.

Disadvantages:

  • There are no significant ones.

SHURFLO 380GPH

Popular bilge pump made of durable plastic. The material is able to withstand high loads and does not deteriorate over time. The design guarantees high performance, so up to 24 liters of water is pumped out in a minute. Pump type - circulating.

It is powered by 12 V, like the previous versions. The maximum fluid temperature should not exceed 54 degrees, otherwise there is a risk of failure of the main components. There is a 2.5 A fuse in the power circuit, but you need to buy it separately.

The average price is 2,280 rubles.

SHURFLO 380GPH

Advantages:

  • Good job;
  • Durable body;
  • There is a fuse;
  • High reliability;
  • Water transfer rate.

Disadvantages:

  • Not found.

TMC 450GPH

Low cost performance with robust construction. The pump is started in two modes: manual and automatic. This became possible thanks to the installation of an additional switch. The maximum lifting height is 2 meters. In one minute, the device is capable of pumping out up to 28 liters of water. The dimensions of the branch pipe are 18.5 mm.

The average price is 1,250 rubles.

TMC 450GP

Advantages:

  • Low cost;
  • Rugged construction to withstand minor impacts;
  • Convenient connection;
  • Raises water 2 meters;
  • High-quality assembly;
  • Life time.

Disadvantages:

  • Not found.

TOP of the best models of the middle price segment

RULE 500, 33 l / min

A good model from an Italian manufacturer, which has a long service life and is perfect for small boats. The shaft is made of high quality stainless steel.

The motor is housed in a completely sealed compartment that does not get water. The stuffing box is made of Teflon, which is also a good solution that has a positive effect on performance. Requires 24 V, so not suitable for every boat. In addition, there is a wall bracket.

The average price is 5,150 rubles.

RULE 500, 33 l / min

Advantages:

  • Strength;
  • Durability;
  • Value for money;
  • Convenient connection;
  • Wall mountable;
  • Performance.

Disadvantages:

  • There are no significant ones.

WHALE Orca GPH950

Robust design and high performance - these are the characteristics of the WHALE Orca GPH950. The device is popular with experienced sailors and hobbyists.

The installation process takes a minimum of time, just follow the instructions. The outer part is made of high quality ABS plastic, which is good for impact resistance. There is a built-in filter that will prevent various particles from entering the blades.

Sold at a price: from 5 400 rubles.

WHALE Orca GPH950

Advantages:

  • Durable body;
  • Easy installation;
  • Simple maintenance;
  • Built-in filter;
  • Powered by 12V;
  • Lifting height - 3.5 m;
  • It will remove up to 60 liters of liquid in a minute.

Disadvantages:

  • Not found.

Koshin Ltd. BL2512NBAA

A portable model that is convenient and has a wide range of uses: from pumping water at home to eliminating leaks on board the ship. For an hour of operation, the device will pump out up to 3,150 liters of liquid, which is a good result. External and internal elements are made only of corrosion-resistant materials, this increases the service life of the product 2 times compared to some analogues.

The average cost is 6,900 rubles.

Koshin Ltd. BL2512NBAA

Advantages:

  • Raises liquid up to 4 meters;
  • Branch pipe diameter - 25 mm;
  • Long service life;
  • Transfer speed;
  • Convenient installation.

Disadvantages:

  • Not found.

Top Best Premium Models

Sahara1100 ATW-4511-1

A powerful submersible pump that fits every boat. The pump can be easily installed even in confined spaces. It is sold in three modifications, which will allow you to choose the optimal model without unnecessary time spending. For convenience, the manufacturer has equipped the equipment with a test pin.

Sold at a price: from 8,500 rubles.

Sahara1100 ATW-4511-1

Advantages:

  • Durable body;
  • High resistance to corrosion;
  • Easy installation;
  • Efficiency;
  • Reliability.

Disadvantages:

  • Not found.

HEAVY DUTY HD1700

An effective model that will eliminate large floods in a few minutes and allow you to move on. The product is made from durable materials that can withstand heavy impacts and won't break. The electric motor is completely sealed, so not a single drop of water will affect its performance.

Sold at a price: from 8 640 rubles.

HEAVY DUTY HD1700

Advantages:

  • High-quality assembly;
  • Convenient pipe;
  • Installation takes a couple of minutes;
  • Doesn't make noise;
  • Performance.

Disadvantages:

  • Not found.

Osculati Sahara S750

Popular pump that has passed the CE certification. Designed for installation in small ships. The motor operates on permanent magnets. Internal elements are made of materials resistant to corrosion. The bearings are self-lubricated. No tools are required to disassemble the equipment.

The average cost is 8 830 rubles.

Osculati Sahara S750

Advantages:

  • Does not take up space;
  • Fast work;
  • Does not deteriorate from frequent use;
  • The bearings are constantly lubricated;
  • Disassembled without tools.

Disadvantages:

  • Not found.

Finally

The bilge pump is an effective tool for quickly removing excess fluid from the ship. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.

LEAVE A REVIEW

Please enter your comment!
Please enter your name here