🖥Best Computer Cases for 2020

0

Every experienced gamer cares not only about the internal configuration of a personal computer, but also about the purchase of an appropriate case. Beginners rarely pay attention to this and, trying to save money, buy cheap equipment, because they think that it only gives an original look. However, any experienced user will tell you that functionality is considered first, and then execution. The editors of the site "best.techexpertolux.com/en/" have prepared for you a rating of the best PC cases for 2020.

The main function of the system unit

People who are just assembling their first computer try to save on almost everything, but if the processor and video card do not work, then the system unit for the PC falls under the distribution. After all, most people think that its role is exaggerated, and this is just a way for marketers to increase sales. But in fact, everything is different, because it is from the system unit that the experienced part of users starts when choosing components. Thanks to him, it is convenient for a person to work with peripherals, besides, the stability of the operation of each element is maintained.

The main property of a computer case is to protect the internal parts from possible damage and to install components in the designated places. In addition, the system unit participates in the cooling of the elements and, depending on the model, is able to shield the electromagnetic radiation that comes from the hardware devices.

For the production of the system, materials such as aluminum, steel and plastic are used. The selected metal determines not only the degree of protection against mechanical damage, but also the quality of the cooling system. Most of the high-end models are made of aluminum because it helps dissipate heat. For ordinary users, the housing is made of galvanized steel. The noise level and protection depend on the wall thickness, it is recommended to buy products with a size of 0.5-1 mm.

To give an original look, some companies produce models with a transparent window and backlight, others give thematic designs (such as steampunk, pyramid, transformer, etc.). But this is a matter of taste, so you shouldn't dwell only on the external performance.

Types of enclosures

Having opened the page with the system blocks in the online store, a person will see thousands of versions, in fact, of the same device. However, despite all these models, they fall into two categories: horizontal placement or vertical. The first type was actively used in the first computers, which is worth recalling the DVK-2 microcomputer. Today this type has found active use in home theaters.

Therefore, the market is filled with systems with a vertical form factor, which is called "Tower". Depending on the size, they are of three types:

  • MiniTower. Used to create a laptop. The main advantage, and also a disadvantage, is the small dimensions of only 178x432x432 mm. In this regard, only mini-type products are placed inside. In addition, in such devices it is almost impossible to maintain the optimal temperature regime;
  • MidiTower. Slightly larger than the previous version: 183x432x490 mm.It is actively used among users who prefer small devices, but with the ability to install all computer components. Maintains optimal temperature conditions;
  • BigTower. This option is used to create a "game monster" or a productive device. It easily accommodates video cards that take up several expansion slots, and there will also be additional space for placing cooling devices. Its dimensions are 190x482x820 mm. The only drawback of this solution is the high cost and footprint. Therefore, such models are found only among advanced users and pro players.

What to look for when choosing

After a person has figured out the main function and types of a system unit, it is important to know the selection criteria that will help decide on the purchase of equipment.

The first thing you should pay attention to is the type of computer case. Here it is better to pay attention to the fastening points of the motherboard. So, some oversized models can support the installation of mini-ITX, but mounting standart-ATX in the minitower will be problematic and more often impossible. Thus, special attention is paid to this item.

In addition to the motherboard, other elements must fit into the system unit. Some difficulties arise for users who buy a large graphics card with several coolers or install a processor cooling system that takes up a lot of space. In addition, we must not forget that the shape of the case determines the amount of internal space for mounting hard drives, remote panels or CD drives. It follows from this that the smaller the dimensions, the poorer the possibilities.

If a person bought a small case for self-assembly, then the first drawback that he will encounter during the installation of elements is limited space. After all, inside each device will be end-to-end, and hundreds of wires will only make it difficult to access a specific part, so when he encounters a problem, he will regret having bought a device with such a form factor.

It is worth knowing that cheap models are usually disassembled with a standard screwdriver, even if you only need to open it. While in expensive versions, manufacturers install a system where such actions are performed without the use of available tools. Service is simplified and comfort is increased.

Cooling system

The case is a direct participant in the cooling of the elements of the computer system. This topic is complex and requires not a single paragraph to be considered, but speaking in general terms: for the normal and full functioning of the PC, a specific temperature must be maintained inside the system unit, otherwise the work will be unsafe and subsequently one of the elements will fail, which is fraught with monetary costs. The hottest components are the central processing unit (CPU) and the video card, however, in addition to these devices, other parts are subject to heating. The permissible temperature range is individual for each.

Cooling occurs thanks to the efficient internal layout of the system unit and the air that moves through it. So, in a minitower-type case, each element heats up due to the close arrangement of objects. It is difficult for the air flow to break through, as a result of which stagnant zones appear, in addition, dozens of wires block the path. Therefore, temperatures rise at a rapid rate and user safety is called into question.

For large models, this is not a problem, since the elements are located at a good distance from each other, and the temperature does not rise so quickly. Because the airflow that the cooler creates reaches every component.Some variants are sold with fans already installed or with dedicated space. Their number and sizes are individual for each model.

For a standard case, the cooling scheme works as follows: air enters through the front side of the case, passes through the hard drive, then enters the motherboard, cools all elements and exits through the back wall or power supply. It follows from this that the standard arrangement of the fans is from the front to the bottom (supply), from the rear to the top (exhaust). Additional mounting locations are available both at the top and on the side panel.

There is one significant problem behind these actions. Since air is taken from the room, dust enters it, more than 50% of which remains on the surface of computer components. If you do not pay attention to it, then over time, enough dust will accumulate there to reduce the heat transfer of the elements and cause the system to overheat. In some cases, a short circuit may occur and then the computer will fail. However, some manufacturers have solved this problem by installing special filters at the inlet, which are just as important to care for.

Power Supply

Some models come with a built-in power supply, which saves some money, but they are better purchased for the office than for building a gaming PC. After all, the power of the built-in PSU is no more than 450 W, and a powerful computer requires at least 600 W.

Top manufacturers

The modern market is overflowing with hundreds of manufacturers, but according to the survey, most users pay attention to the following companies:

  • COLLER MASTER;
  • IN WIN;
  • AEROCOOL;
  • Zalman.

TOP-7 popular models

Zalman Z1 Neo

A gaming system unit of the Midi-Tower type from the best manufacturer will allow even a beginner to build a productive PC. There is the possibility of installing a motherboard of various form factors, from mini-ITX to Standart-ATX. No power supply. Dimensions - 203x445x464 with a weight of 4.3 kg. Material - steel with a wall thickness of 0.5 mm. Execution color - black.

The maximum size of a video card is 37.5 cm, which allows you to install most of the top models. There is a window on the side wall, so the user can easily control the operation of the components.

There are 4 internal 3.5 "bays, one 2.5" and two 5.25 ". There are 3 fans (two in the front and one in the back) to provide efficient cooling. Beautiful LED backlighting will give your device a unique look.

Average cost: from 2200 rubles.

Zalman Z1 Neo

Advantages:

  • Quiet;
  • Assembly;
  • Includes spare bolts;
  • Spacious;
  • Price.

Disadvantages:

  • Poor location of the 3.5 ″ compartment;
  • The cooler quality leaves much to be desired.

AeroCool Aero-300 FAW Black Edition

This midi-tower model resembles a minimalistic robot face. Suitable for both general use and play build. Supports installation of ATX and micro-ATX motherboards. Dimensions - 190x415x460 mm, weight - 3.6 kg. Made of steel, with a wall thickness of 0.45. Black color.

A 372 mm long video card easily fits into the case, the maximum height of the processor cooler is 15 cm. There are two 3.5 ″ compartments, one 5.25 ″ and three 2.5 ″.

There is one built-in fan and 5 additional bays, there is also the possibility of installing a liquid cooling system. The manufacturer provides a one-year warranty.

Available in many stores starting at RUB 2,500.

AeroCool Aero-300 FAW Black Edition

Advantages:

  • Acrylic glass;
  • Design;
  • 5 compartments for coolers;
  • Good location of the basket.

Disadvantages:

  • Thin metal;
  • The power cable rests against the body.

Thermaltake Suppressor F1

A compact body that is suitable for people who prefer small dimensions (260x276x319 mm). For this model, the only solution is a mini-ITX board. Equipment weight - 3.2 kg. Made of steel with transparent glass. Black color.

The user can install any video card whose length does not exceed 285 mm. There are two bays 3.5 ″ and 2.5 ″, bays 5.25 ″ are missing.The case has a built-in 200 × 200 mm fan, two places for additional cooling devices.

The warranty is 3 years.

Average cost: from 3000 rubles.

Thermaltake Suppressor F1

Advantages:

  • Sophisticated design;
  • Easy assembly;
  • Good filters;
  • Space for a CPU cooler;
  • Compactness.

Disadvantages:

  • Thin walls of the case;
  • Flimsy legs.

Deepcool Matrexx 55 Black

A gaming case that will delight every user with a design. The standard size refers to the Midi-Tower, it is possible to install motherboards of any form factor. Dimensions - 210x480x440 mm, with a weight of 7 kg. The thickness of the steel walls is 0.6 mm; the fans will not cause any discomfort.

A card up to 370 mm in size is installed in the system unit, and the height of the processor cooler reaches 16.8 cm. There are no built-in fans, but there are 4 places for additional coolers, and the user can also install a liquid cooling system.

There are 3 USB connectors on the front side. The power supply is located horizontally at the bottom. Backlight - RGB.

Average cost: from 2600 rubles.

Deepcool Matrexx 55 Black

Advantages:

  • Rating 5 out of more than 30 reviews;
  • Spacious;
  • Design;
  • High-quality blowing;
  • Backlight control;
  • Strained glass;
  • Price.

Disadvantages:

  • Not found.

AeroCool Cylon Black

Decent housing, highly appreciated by hundreds of users. The size is standard. Supports virtually any form factor. No power supply. Dimensions - 198x459x413 mm, with a weight of 3.8 kg. Made of steel, with a wall thickness of 0.5 mm.

You can install a video card up to 371 mm in the system unit. There are 2 bays 3.5 ″ and 2.5 ″ and seven expansion slots. The device itself has a built-in fan size - 120x120 mm and 5 places for additional. coolers.

1 year warranty.

Cost: from 2200 rubles.

AeroCool Cylon Black

Advantages:

  • Many backlight modes;
  • Spacious;
  • Convenient top panel;
  • 5 mounts for fans;
  • Low price.

Disadvantages:

  • The glass collects dust.

Chieftec GL-02B w / o PSU

The gaming body, made of durable steel with a wall thickness of 0.6 mm, will not be distracted by noise during operation. Supports motherboards: mini-ATX, mATX, ATX. Dimensions - 203x505x436 mm. Weight - 6.9 kg. Black color.

Inside is a video card up to 349 mm. Expansion slots - 7. Four built-in fans provide an impeccable temperature for every computer component. There are also 2 places for mounting additional. cooling devices.

Average cost: from 5000 rubles.

Chieftec GL-02B w / o PSU

Advantages:

  • Quality material;
  • 4 built-in fans;
  • Simple assembly;
  • Equipment;
  • Plenty of space for cable management.

Disadvantages:

  • Not found.

IN WIN 303 (CF06) w / o PSU Black

This option is suitable for those who are willing to overpay for quality. The body is made of steel, the wall thickness is more than 1 mm, which makes the device reliable and practically silent. Supports all popular motherboard form factors. The design is made in strict minimalism, which is appreciated by most buyers. The device weighs up to 11 kg.

There is one built-in cooler and 6 convenient places for additional. Supports cooling radiators.

Cost: from 8000 rubles.

IN WIN 303 (CF06) w / o PSU Black

Advantages:

  • Wall thickness - 1.2 mm;
  • Easy DIY cooler installation;
  • Nice appearance;
  • White backlight;
  • High quality glass.

Disadvantages:

  • Not found.

Output

If you have experience using computer cases described in the rating, or a more interesting model, tell us about it in the comments.

LEAVE A REVIEW

Please enter your comment!
Please enter your name here