Best Electric Routers for 2020

0

To decorate wood elements, you must use quality tools. One of the popular tools is a milling cutter, but in order for it to last a long time and not break at the wrong time, you need to pay attention to its choice, as well as know the best models. For this, the editors of the site "bestx.htgetrid.com/en/" have prepared for you a rating of the best electric milling cutters for 2020.

TOP quality models of the budget segment

Fiolent MF2-620E

Simple yet effective 620W device. Despite the fact that this model lacks a large number of auxiliary functions, the product copes well with everyday tasks. It will become easier and more convenient to carry out various operations on wood, the latter is achieved due to ergonomic handles that have an anti-slip coating. The rotation speed varies: 7800-32000 rpm, however, it is not recommended to operate the device at high values, as this will lead to quick wear.

The maximum milling depth is 50 mm, which is the optimal solution for finishing. The size of the collet included is 8 mm. For the convenience of the user, there is an adjustment of the rotation speed, as well as a revolving stop. To carry out milling with maximum accuracy, there is a depth setting. To keep the workspace clean, there is a connector for a vacuum cleaner. The structure weighs only 2.3 kg, which makes it easy to move the product. The set includes a parallel stop and a limiter, this will greatly simplify the work.

The average cost is 2 690 rubles.

Fiolent MF2-620E

Advantages:

  • Functionality;
  • Comfortable handles;
  • Small weight;
  • Simple controls;
  • Low price;
  • Setting the milling depth;
  • Equipment.

Disadvantages:

  • Bearing wears out over time;
  • Low power;
  • Difficult to change the cutter.

Mekkan MK 83103

Chinese model, which has a good power - 1200 watts. The maximum speed is 30,000 rpm, but it is best to use the device in the range of 18,000-24,000 rpm. Collet size - 6, 8 mm. Milling depth - 47 mm. The sole is completely cast, which makes it easier to operate the device. Unlike the previous version, there is a spindle fixation, which is a convenient solution. The set includes an open-end wrench and an adapter for connecting a vacuum cleaner. The cutter is changed in two ways, including keyless replacement is supported, which has a positive effect on operation.

The weight of the structure is 3.5 kg. The product has comfortable handles that provide a secure grip and do not slip. The router is easy to operate. The product is intended for household wood finishing operations. The noise level is quite high, so it is best to wear headphones while working to avoid damaging your eardrums. The turret stop and speed control will enable faster milling. The Mekkan MK 83103 is covered by a one-year warranty. The service life for infrequent use is 2-3 years, which is considered a good solution for a cheap Chinese device.

Sold at a price of 2,990 rubles.

Mekkan MK 83103

Advantages:

  • Low cost;
  • Doesn't require any special knowledge;
  • Convenient replacement of the cutter;
  • Simple controls;
  • Ergonomics;
  • Good power.

Disadvantages:

  • There is a marriage;
  • Low reliability;
  • The presentation deteriorates quickly.

Kolner KER 1200V

A quality budget solution that is suitable for a wide range of everyday tasks. Device type - vertical. The power consumption is 1200 W. The milling depth is 50 mm, which makes it possible to carry out a large number of different operations. If you do the milling correctly, the hole will be nice and even after finishing. The rotation speed ranges from 15,000 to 30,000 rpm. The set includes two collets, 6 and 8 mm in size. Adjusting the rotation will allow you to set the optimal speed for the type of work, which will reduce the load on the electric motor.

The kit includes an adapter for connecting a vacuum cleaner, which will reduce contamination in the workplace. The assembly is done with high quality and reliable. Among budget models, this option is considered one of the highest quality ones. The noise level is high, this should be borne in mind when buying. The cable length is 2 meters and this is the main disadvantage of the model. A similar nuance is solved by an extension cord. The weight of the device is 4 kg, which will also create a slight discomfort during operation, but this solution has a positive effect on accuracy, since the structure will not move arbitrarily.

The declared service life is 3 years, while the warranty is one year. However, according to customer reviews, if you use the product only once a month or two, then the product will last up to 4 years. But we must not forget about the wear of the parts themselves, which can occur in 1.5 years.

The average cost is 3,000 rubles.

Kolner KER 1200V

Advantages:

  • An excellent solution for home and summer cottages;
  • No backlash;
  • There is no overheating;
  • Low cost;
  • Good build;
  • Equipment.

Disadvantages:

  • Rigid and short cord;
  • Cheap plastic housing;
  • Noisy.

CALIBER FE-1000M

Another budget solution suitable for home use. The power consumption of the device is 1000 W, at a rotation speed of 11500-30000 rpm. The cutter diameter is 30 mm, the depth is 3 cm. The set includes two collets 6 and 8 mm. The equipment has a basic set of options that make it easier to operate and increase the reliability of the tool. The outer part is made of plastic, of course, there is no need to expect high strength from it, but unlike most products, it is made exactly. Replacing the cutter takes a minimum of time, since there is a spindle fixation, which simplifies the task.

Weight - 4 kg, which is the best solution and will allow operations without accidental displacement. The handles are made of quality material that fits well in the hand and makes it easier to control the equipment. Vacuum cleaner adapter and replaceable brushes are included. The declared service life is 2-3 years, with a 1 year warranty. This is more than enough for budget solutions. However, if a person plans to use the router on a daily basis or several times a week, the chance of breakage increases. Since the interior is equipped with cheap materials.

Sold at a price: from 3,060 rubles.

CALIBER FE-1000M

Advantages:

  • Convenience;
  • Low cost;
  • Form Factor;
  • Nice body;
  • Suitable for home.

Disadvantages:

  • High vibration;
  • Over time, backlash appears;
  • Hard cord.

PATRIOT ER 120

High quality 1200W model. The device has good technical characteristics and is made of a durable case. The electric motor and electronic control unit are made of high quality materials, which allows to increase the service life. The milling depth is 55 mm and the diameter is 30 mm, which is a suitable solution for a wide range of tasks. Adjusting the rotation speed allows you to set the optimal value (min. - 11000, max. - 30,000 rpm). The set includes two collets 6 and 8 mm.The revolving stop will allow you to securely fix the equipment in one position.

To replace the cutter, a minimum of actions are required, since there is a spindle fixation. Also, the design provides a hole for connecting a vacuum cleaner, which guarantees a clean workplace. The length of the cable is 2 meters, while, as in all cheap models, the cord has high rigidity, especially at low temperatures. The weight is 3.62 kg. The kit contains a set of spare brushes, but it is best to purchase them in a specialized store, since they do not differ in reliability. The product warranty is 2 years, the declared service life is the same.

The average cost is 3,755 rubles.

PATRIOT ER 120

Advantages:

  • Low weight;
  • Good running along the guides;
  • Doesn't stop in place;
  • Comfortable handles;
  • Smooth start button;
  • Low price;
  • Optimum power.

Disadvantages:

  • High vibration at maximum speed;
  • Noisy;
  • Over time, bearing play appears.

Rating of the best milling cutters in the middle price segment

Makita PJ7000

High quality keyway router suitable for professionals and amateurs. The output power is 960 W, which is a good result for such a device. Maximum rotation speed - 11000 rpm. Vibration is minimal, which has a positive effect on ergonomics and handling. Milling depth - 20 mm, diameter - 10 cm. For quick replacement, the manufacturer equipped the structure with a spindle fixation. The electric motor withstands high loads and does not break from frequent use. The device has a soft start and is able to operate under almost any conditions.

The handles are made of durable material, which prevents rapid wear and has a positive effect on ergonomics. The cable length is 2.5 meters, while the cord is not as rigid as that of budget representatives. The router's weight is 2.4 kg, which makes it easy to transport and has a positive effect on handling. The set includes a dust collector and a suitcase for easy storage. The product warranty is 12 months, with a service life of 3-5 years, depending on the frequency of use.

The average cost is 15 170 rubles.

Makita PJ7000

Advantages:

  • Quality packaging and suitcase;
  • Small weight;
  • Simple setup;
  • Not as hard wire as cheap models;
  • Adjustable sawdust discharge;
  • Good build quality.

Disadvantages:

  • Not found.

Hitachi M12SA2

A popular product in a contemporary style. Made of quality materials that can withstand high loads and have good wear resistance. Type - vertical. The power consumption is 1700 W at a rotational speed of 22000 rpm. The maximum milling depth is 65 mm, which is suitable for use in the professional field. The electronic control unit is protected from potential problems with the electrical network. The size of the collets included is 12 mm. For greater reliability, there is a turret stop and the ability to set the milling depth.

The handles are made of durable material, pleasant to the touch. The noise level is high, therefore it is recommended to use headphones during operation. The vibration is low, which has a positive effect on the quality of the operations. For quick replacement of the cutter, the spindle is supported, the operator does not have to constantly use the key. To prevent dust from accumulating at the workplace, a hole for connecting a vacuum cleaner is provided. The weight of the equipment is 6.2 kg, which may not be suitable for some users. The service life and warranty is 2 years, but with moderate use and adherence to the rules of operation, the device will work for 4-5 years.

The average cost is 16 220 rubles.

Hitachi M12SA2

Advantages:

  • Good value for money;
  • Convenience;
  • Efficiency;
  • Nice body;
  • Unusual appearance;
  • Durability;
  • High quality wire.

Disadvantages:

  • Rip fence short bars.

Metabo OFE 738

Reliable device with adjustable rotation speed.The outer part is made of durable material that can withstand high stress. Even at 34,000 revolutions, the equipment will not vibrate much, which has a positive effect on the quality of the operations performed. The set includes a collet, 8 mm in size. The sole is cast.

For greater convenience, there is a function of maintaining a constant speed under a certain load. Quick replacement of the working element is possible thanks to the spindle lock. The cable is 4 meters long, so the user does not need to connect an extension cord and clutter up the space with different cords. The mass of the device is 3 kg.

The average cost is 16,910 rubles.

Metabo OFE 738

Advantages:

  • High-quality housing;
  • Strength indicators;
  • Efficiency;
  • Durability;
  • Reliability;
  • Optimal price.

Disadvantages:

  • Not found.

DeWALT DW 621

A popular model from a well-known manufacturer, which is suitable for professional milling. The device is equipped with high-quality and comfortable handles that simplify control. Power consumption is 1100 W, while the output value is 620 W.

The rotation speed is fully adjustable, the minimum and maximum rates are 8000 and 24000 rpm, respectively. The maximum milling depth is 55 mm, with a diameter of 3.6 cm. Soft start ensures high-quality and reliable operation of the electric motor. There is a branch pipe for connecting a vacuum cleaner. During operation, a noise of 86 dB is emitted.

The average cost is 19,700 rubles.

DeWALT DW 621

Advantages:

  • 3-year warranty;
  • Convenience;
  • High-quality housing;
  • Durable cord;
  • Several useful options;
  • Quality milling.

Disadvantages:

  • Not found.

Rating of premium models

BOSCH GOF 2000 CE Professional

A professional model designed for complex operations. The power of the product is 2000 W. The cutter stroke is 65 mm. The size of the collets included is 12 mm. The product has all the necessary functions that greatly simplify operation and increase the service life of the product. The noise level is 89 dB, so headphones must be used when performing operations. The mass of the device is 6 kg. The kit contains all the necessary elements to ensure quality work.

The average cost is 32,000 rubles.

BOSCH GOF 2000 CE Professional

Advantages:

  • High-quality assembly;
  • Trouble-free work;
  • Convenient management;
  • Efficiency;
  • Quality milling.

Disadvantages:

  • Not found.

DeWALT DW 624

A handy device with a power output of 960 W and a rotation speed of 20,000 rpm. The cutter stroke is 62 mm, which is the optimal solution for complex operations. The maximum diameter is 4 cm. There is an electronic engine protection, which prevents rapid wear and increases performance. Equipment weight - 5.1 kg.

The average cost is 26 800 rubles.

DeWALT DW 624

Advantages:

  • Convenience;
  • High-quality stops;
  • There is no backlash;
  • Optimum power;
  • Efficiency.

Disadvantages:

  • Not found.

Festool OF 1010 EBQ-Plus

Reliable vertical model with the ability to change speed indicators. The product is intended for professional use. Therefore, it is equipped with all the necessary functions, and is also made of durable materials that withstand prolonged stress and do not deteriorate. As with all devices, there is a connection for a vacuum cleaner, which will quickly and efficiently clean the workspace from sawdust. The noise level is 79 dB.

The average cost is 43,000 rubles.

Festool OF 1010 EBQ-Plus

Advantages:

  • Simple adjustment;
  • Low vibration;
  • High quality;
  • Light weight - 2.7 kg;
  • Fast stop of the spindle;
  • Constant speed support.

Disadvantages:

  • Not found.

Finally

To choose a quality milling cutter, it is important to pay attention to the technical parameters, as well as the availability of auxiliary options that will help to increase the productivity and quality of the operations. If you have experience using the models described in the rating, or more interesting representatives, tell us about it in the comments.

LEAVE A REVIEW

Please enter your comment!
Please enter your name here

I have read the terms user agreement *